Reference USB interface characteristics

Posted on January 8th, 2010 in battery maintain, battery review, laptop battery | No Comments »

Reference USB interface characteristics

Recently(inspiron e1405 battery), the State Ministry of Information Industry made July 1 mobile phone charger from a unified interface standard, which is a very significant work, it can not only reduce pollution, conserve resources, reduce waste, but also user-friendly, save money, this is a win-win result.

Inspired by this, we recommend: Reference USB interface characteristics VGP-BPS8, VGP-BPS8A, mandatory to develop and implement different digital products charger national uniform standards so that different digital products charger and rechargeable batteries, is compatible with, but also is compatible with the computer through the USB interface. This has several advantages:

A reference to a computer USB interface standards to promote a unified charger input and output interface standards, and make charger voltage is adjustable, allowing mobile phones, MP3, MP4, digital cameras, digital cameras, notebook computers, electronic dictionaries, video machines, as well as other types of small electric appliances and digital charger is compatible with each other to implement separation of digital products and charger product sales, which will reduce the cost of digital products VGP-BPS9, VGP-BPS9/B and reduce consumer spending, convenience of the people are living, greatly saving resources and reducing e-waste pollution . It will not only benefit the Chinese people, will benefit the people of the world.

Although it will squeeze the profit margins of manufacturers, but because of the implementation of standardized, manufacturers can also reduce costs, the computer’s USB port is a successful example of this VGP-BPS9/S, VGP-BPS9A/B is a win-win result.

Epoxy circuit board industry will peak in the shuffle(D)

Posted on November 19th, 2009 in battery maintain, battery specs, battery tip | No Comments »

Epoxy circuit board industry will peak in the shuffle(D)

Environmental protection is the most important, China’s epoxy resin industry association experts said that at present China has become the world’s largest epoxy printed circuit board (PCB)-producing countries. In mainland China in 2006, the circuit board production VGP-BPS9 S reached 13 trillion square meters, according to the average weight of 30 tons per million square meters is estimated that the total weight of 39 million tons. The CCL processed into the circuit board substrate material utilization rate of about 90%, or printed circuit board substrate manufacturing enterprises annual consumption of approximately 144.4 million square meters, the resulting corner of approximately 14.4 million square meters of waste, in accordance with an average million square meters of the VGP-AC19V13 weight of 25 tons is estimated that there are 36,000 tons of waste corner; In addition, the substrate waste edge manufacturing enterprises is about 7% of the finished product can be projected out of CCL scrap materials generated 2.5 million tons; finished printing circuit boards in the machine factory utilization rate of about 95%, can calculate the machine plant scrap materials generated 2.0 million tons. The three combined 8.1 million tons.

In addition, China imported in large quantities of waste every year of electrical and electronic VGP-BPS9 B products in mainland China scrapped dismantling of scrap circuit boards, and its total up to 40 million tons. If they are known as the world’s largest e-waste dismantling bases in Guiyu, recycling of electronic waste per year or more in the megaton range, while the circuit board in the proportion of e-waste, about 15%, only Guiyu 1, the annual waste generated by the circuit board on up to 15 million tons. Shows the need to dispose of waste per year printed circuit board at 50 million tons. PCB Enterprises in China, such as by 1000, the average days spent etching solution containing copper produced 2500 cubic meters to 3,000 cubic meters per cubic 140kg ~ 150kg of copper content, the daily will be able to recover metals from the waste 450 tonnes of copper a year to recover 135,000 tons of copper, equivalent to more than 10 million tons of annual production capacity Tongchang annual production. Shanghai copper exchange of copper according to 35,000 yuan / ton, alone there are 4.7 billion annually renewable output of copper, can increase the revenue for the state nearly 800 million yuan. Thus, China’s electronic circuit industry, “three wastes” thoroughly governance is critical. The use of discarded circuit boards, not only to solve environmental NP-20 problems, is also to be developed in a “gold mine.”

As the central authorities for sustainable development and cleaner production concepts into, epoxy printed circuit industries and enterprises attached to environmental protection and investment in the tremendous progress for all to see. Especially in these years of investment in new plant construction, PCB and comprehensive implementation of the environmental protection facilities and factory facilities, production processes simultaneously planned design, simultaneous construction, synchronous inspection, synchronous operation of the principle of promoting environmental protection facilities, construction companies have invested more money and more concerned about the environment of advanced technology applications. Our association issued a “green production cycle of the implementation of industry, economic initiative,” and draw up an international trade association first established by the association, “Printed Circuit Board manufacturing industry clean production standards.” Was officially approved as the national association of 2 – CPCA environmental clean branch in the new year will be better to help enterprises vgp bps2c and VGP-BPS8 governments to push China’s PCB, CCL’s “three wastes” treatment level of a comprehensive upgrade to the world-class.

How to activat a new laptop battery

Posted on October 10th, 2009 in battery review | 2 Comments »

Battery maintenance know-how to activate one of the new hp laptop battery?

When talking about the use of new battery, we often see this view: “we buy a new battery will have more than 3% of the electricity, put the battery’s remaining electricity is used up, until the shutdown, then external power supply charge. Apple Laptop Battery Powerbook G4 battery,apple a1185 charging time must be more than 12 hours, repeated three times to do in order to activate them“

This view is correct or not correct? In fact, the majority of cases, we have no trouble then go to activate a new battery. This is because now the majority of brands of batteries at the factory when the activation has completed the work, notebook battery factory belt are some power in order to avoid the natural wear and tear brought about by damage to the battery. Should be activated battery protection circuit in the absence of circumstances, the circuit itself can be a lithium battery protection circuit, this circuit is designed in order to avoid over-charging and discharging batteries, general battery is full, the charging indicator goes out when , the battery on the electric charge does not enter, you then plug inserted in the face of the pavilion dv6000 Battery , Presario V3000 Battery to charge what the use?

From the battery will be able to see the situation on the battery has no charge, while teaching you a simple method can be judged on the battery has not during the charging, battery charge when the phenomenon will have fever, when the GD761 ,U4873 battery is full after an hour (power do not pull the plug), you try the battery again to see if the battery is not hot hot? The results certainly are cold, not because the inspiron E1705 battery ,inspiron E1505 battery ,xps m1330 battery charge-discharge state of course, do not heat.

Notebook manufacturers at the factory will be proposed that a new battery for more than 10 hours. This may allow some users have had the first error point of view, the author of this opinion is that should the notebook manufacturers are taking into account some new users in the new battery when the charge is not completely grasp the skills, simply allow them to charge 10 hours, apple a1185,so this should be the business of expediency.

Tips: It is now the majority of cases, we have no trouble then go to activate a new battery
Confirmed that the battery be affected(b)
Identification of battery pack

If you have one or more comply with the above list of Toshiba laptop, make sure that has affected the possibility of the battery pack has been installed on your computer. So far the most convenient and most accurate way to verify is to use the Toshiba battery detection utility. Battery Detect utility will be identified has affected the possibility of whether the battery pack is installed in a Toshiba laptop in the Units. Once confirmation has affected the possibility of the battery pack in your computer, inspiron 1300 battery,please prompt information in accordance with procedures to participate in the new battery pack replacement program initiatives.

Detect battery to use the program only about 200KB, so you can in a very short period of time download finished. Click here to download.

After the download according to the following steps:

  • 1. Ask you to Windows administrator (Administrator) identity sign.
  • 2. Download procedure will be extracted to a TOOL4CHNCS4.zip Apple A1175 Battery,(for example: My Document) folder.
  • 3. To enter into the folder My Document \ TOOL4CHNCS4, double-click the implementation BatteryCheck4.exe Detect utility.
  • 4. BatteryCheck4.exe implementation in accordance with the screen after the start of the prompts.
  • If you do not want to download and use the latitude d600 battery -testing procedures, you can also select in accordance with the “battery pack artificial judge Guide” (Click here to download) Introduction to determine the relevance of whether you have the possibility of the affected battery pack, battery pack at the same time the Model and serial number. This manual method requires you to battery pack removed from the computer,Powerbook G4 battery ,and in accordance with “battery pack artificial judge Guide” provided by visual information on the battery pack than the corresponding tag information to carry out. Please note that this method may result in inaccurate results.Sony laptop battery , May, based on visual than on the battery pack that should be replaced, but the results of battery testing procedures that do not have to replace the battery pack. If these two identification methods that differ from the conclusions, the results of testing procedures batteries (VGP-BPS9 ,VGP-BPS8 ) are correct. Detect the use of battery-related procedures are a priority to determine the manner in which we recommend.

    If you are required to determine the course of any help, please call the Toshiba computer Hotline :800-820-2048 (fixed) or 116-986-2048,021-52564713 (cell phone), connected after the press “4.” Toshiba computer Hotline working hours are Mon-Sun (8:30-17:30) (statutory holidays).

    Doubling Laptop Battery Life

    Posted on October 6th, 2009 in battery review | No Comments »

    Anyone who uses a laptop on an airplane would love a single battery to last through a trans-American flight. Now researchers at Intel believe that they can double a laptop’s battery life without changing the laptop battery itself. Instead, they would optimize power management–system wide–of the operating system, screen, mouse, chips inside the motherboard, and devices attached to USB ports.

    Power bars: Intel Research engineers yesterday showed off prototype methods for system-wide laptop power savings. Using the current implementation, average power consumption of a laptop can be reduced from 6.23 to 4.02 watts. The researchers believe that the approach has the capacity to slash up to 50 percent of laptop power consumption.aspire 3000 battery,aspire 3030 battery

    To be sure, manufacturers and researchers have been exploring piecemeal ways to make portable computers more energy efficient. Operating systems are designed to deploy power-saving screen savers and put an entire system to sleep if its owner hasn’t used it after a while. And Intel’s forthcoming Atom, a microprocessor for mobile Internet devices, can be put to sleep at up to six different levels, depending on the types of tasks that it needs to do.

    But the problem with these approaches is that they’re not coordinated across the entire device. Intel’s prototype power-management system is aware of the power that’s used by all parts of a laptop, as well as the power requirements of a person’s activity, and it shuts down operations accordingly, says Greg Allison, business development manager. The project, called advanced platform power management, was demonstrated on Wednesday at an Intel event in Mountain View, CA.(XPS m1210 battery, vgp-bps9)

    Allison gives this example: today, when a person reads a static e-mail, the screen still refreshes 60 times a second, and peripherals such as the keyboard, mouse, and USB devices drain battery power while awaiting instructions. “We’re burning energy even when we don’t need to,” Allison says. In this situation, Intel’s system would save power by essentially taking a snapshot of the screen that a person is reading and saving it to a buffer memory. So instead of refreshing, the screen would maintain an image until a person tapped a button on the keyboard or moved the mouse (the keyboard and mouse would also stay asleep until activated).

    All the while, the operating system will be monitoring use of other applications, restricting operations to those that aren’t being actively used. And if there are any devices plugged into a USB port, such as a flash-memory stick, the system would put them to sleep. At the same time, explains Allison, energy-monitoring circuits on Intel chips will put unnecessary parts of the microprocessor to sleep. It takes 50 milliseconds for the entire system to spring to life, he says, a length of time imperceptible to the user.

    Intel isn’t the first to think of the idea of integrating power-saving technology throughout a device. One Laptop per Child (OLPC), the nonprofit that builds inexpensive, rugged laptops meant for children in the developing world, set the standard with a gadget that consumes one-tenth of the power of a conventional laptop–XPS M1330 Battery,aspire 3000 battery. Granted, OLPC’s laptop doesn’t have the capabilities of consumer machines, but it does show what is technically achievable.

    There are definitely advantages to this systemic approach, says Seth Sanders, a professor of electrical engineering and computer science at the University of California, Berkeley. “Comprehensively looking through the system at all of the different pieces that are cycling unnecessarily provides an opportunity [for power savings],” he says.

    Allison says that the company is already talking with operating-system vendors to explore what it would take to integrate this approach into software. And as a major contributor to the new USB 3.0 standards, Intel will have some say in how much power forthcoming USB devices will use. In addition, Allison says, the company is trying to secure deals with display and hardware vendors. “This won’t happen in the next three years,” he says. But he suspects that pieces of the new power-management system will find their way into laptops within five years.