Archive for December, 2009

the identification method of the battery

Posted on December 16th, 2009 in battery tip | Comments Off

While digital products bring lots of joy to people’s lives,for one thing , Samsung battery,but you do not take it lightly ,when purchasing digital products and accessories to consumers, it is necessary to learn some tips for identifying true and false . Today we set about to strip the last layer of JS skin and thoroughly expose the fake lithium batteries!

  1. To distinguish true and false by the anti-counterfeiting marks.
  2. the security signs is used to post In outer package(such as the Sony battery with a Sony security signs in the outer package), this is also one clear distinction place between genuine and fake batteries. the battery generally have a very strong three-dimensional sense of security signs, just like we are now using identity surfaces, while the fake battery have no three-dimensional feeling, fonts rather ambiguous, and some even ordered Sanji missing in general.

  3. To identify the authenticity by observing the printing quality.
  4. In addition to observing the logo addition, you can identify the authenticity through print quality of the cell surface.
    True font size print of the battery is equal, and can be clearly read,but the printing font of the false battery will suddenly become smaller and obscure. The following point is to the the place of qualified label,take for instance the Sony battery, really Sony NP-BG1,their qualified label are in the battery below,the fake batteries qualified label appeared in the top of the battery.

  5. For distinguishing true and false to observe the logo.Before you buy battery,you can look at the manufacturers logo on the surface of the battery, including logo and product models mark the words,take the Sony NP-FC11 for example ,the SONY and “infoLITHIUM; The original equipment batteries surface of the logo is clear and accurate, such as Samsung battery,the battery on the back black with white characters Samsung logo.Some fake batteries do not. If the deformation of the above logo, fonts, error or ambiguity, must be a fake no doubt.
  6. To observe the quality of the battery packaging
  7. The outer surface of really battery is smooth, the false bottom edge of the battery packaging is rough, not smooth; real battery with the battery-shaped plastic undulating and angular shell, fake batteries do not have the plastic shell edges and corners,let us say Samsung SBL-1974.

Finally, to remind consumers to buy Battery signs of the times necessary to keep their eyes open,such as these famous battery,Sony battery,Samsung battery,Samsung batteryand so on, so as to avoid causing unnecessary economic losses.

To know more,please click:rain123-ohlog RainGreen-mytowncolorado rain123-pondokblog

how to distinguish battery?

Posted on December 16th, 2009 in battery review | Comments Off

In general there are three kinds of batteries for us to  use: Nickel-chromium batteries;Ni-MH battery; Lithium battery. they are generally expressed as: Ni-Cd NI-CD, Ni-MH NI-MH, Lithium-Ion battery LI,such as Sony NP-BG1 .

Then how we can know them from others? In general we can distinguish them  from below some points :

  1. To distinguish from the battery identity , lithium Digital Camera Battery is LI, lithium-ion battery is LI-ION.
  2. Another distinction is the number of charge cycles. The number of ordinary rechargeable lithium to only 400-600 times, specially modified products, but 800 times,is generally scrapped after two years, while Ni-MH Digital Camera Battery can charge much more than the lithium batteries,, usually 700 or more, good quality battery can charge and discharge 1200 times, Ni-MH battery life is more longer than lithium.
  3. the last difference is the place of the origin after  battery materials, the origin of the general cell batteries is in Japan, South Korea, mainland China and Taiwan Province, in particular, mostly in Japan. The more well-known is Japan’s Sanyo (Sanyo), South Korea’s LG, Samsung, and so on, the Sony NP-BG1 battery I useed is produced in Japanese.

Battery is made from the batteries, generally people are talking about 4Cell, 6Cell,it means the number of batteries within the battery, such batteries readily are  available in the market. prices generally ranging from 10-20 yuan(such as Samsung SBL-1974from South Korea and Samsung SLB-0637 from China ).China,Samsung ,and Taiwan Province of China  are mostly based on  in processing ,and the core of battery is produced in Japan . In the next-generation cell batteries, some already do not use such a garden-shaped batteries, but do  a lithium polymer block to get greater power and smaller size.

Now that the price of the original equipment batteries is very expensive in market, it is around 1000-1500 in general, so for extending battery life,some of my friends started to replace the battery with Batteries batteries. it is possible in Theory , but in fact it is not .the reason is as follow :

  1. Due to reasons in process, the batteries are generally used the ultrasonic welding, there is no gap,and  it is difficult to apart, even if the hardware is also very difficult to disassemble a close, and some camcorder batteries ,such as Sony NP-FC11 .
  2. because of the internal protection circuit in battery, the event of the internal temperature is too high,it  will automatically cut off to protective battery, the piece of the circuit are damaged when replacing the battery,consequences would be unthinkable.

So I still do not recommend to replace batteriesby yourself, even if the need to be replaced ,you should look for professional and technical personnel to assist the replacement.

 

To know more,please click:
RainGreen-mytowncolorado rain123-militarylogbook rain-blogadu

The classification of the laptop battery

Posted on December 16th, 2009 in battery tip | Comments Off

In general there are three kinds of batteries for us to use, such as:Nickel-chromium Sony NP-BG1 battery ; Ni-MH battery; Lithium battery.they are generally expressed as: Ni-Cd NI-CD, Ni-MH NI-MH, Lithium-Ion battery LI.

  1. because of their too early age ,there are many headache shortcomings for Nickel Cadmium  Sony NP-FC11 NI-CD , such as: bulky, heavy weight, capacity, small, short life, there is memory effect, etc. (useless), and now no longer in use .
  2. Ni-MH battery is more environmentally friendly some compared to other Samsung,it is also by far the most environmentally friendly battery in the world.
  3. Li-ion Samsung SBL-1974could offer important advantages, including a small size, light weight, large capacity, low memory effect, charging time is short, etc.,but you will often see the back of the battery properly abandoned and handling lithium batteries instructions? It will cause environmental pollution. to discard the lithium Samsung SLB-0637

Now some people may be misunderstanding of lithium Sony NP-FC11 , they believe lithium batteries can not remember things, in fact , only  relatively small memory, it seems not to be very clear. And lithium batteries can be divided into lithium and lithium-ion battery two kinds. Lithium-Ion Digital Camera Battery has been in world for a long time ,but it is not safe when used and often might burn, burst when is  in charge, perhaps because of the sake of lithium element too active. Then there is an improved lithium-ion batteries,the element of active ingredients is added in lithium so that lithium is really safe .efficient and convenient, while the older Lithium-Ion Sony Batteryalso is eliminated.

To know more,please click:
rain123-freeblognetwork rain123-xevaa rain-modellprojekt

Make a DIY Monitor Stand on the Cheap

Posted on December 14th, 2009 in battery tip | Comments Off

stand

Loathe to spend more on monitor stands than you spent on your monitors? Build one yourself and save big.

Lifehacker reader Nanu was happy with his dual monitors, but not so happy to spend a whole lot on a fancy dual monitor stand. He visited the local hardware and with a little elbow grease put together a sturdy stand for about $15 to replace your Dell Latitude D520 Battery.

The trade off is a loss of flexibility, you’d better measure three times because the stand and monitor angle will be fixed in place. Even with that kind of trade off however, you’re still saving hundreds of dollars and getting a very tidy stand with excellent cable management in the Dell Inspiron E1405 Battery process. Check out his build guide at the link below for full details and pictures. Have a sweet DIY project to share? Let’s hear about it in the comments.

for the feature! Everyone’s situation is different, so let me explain my choices.

Second to my being very cheap, the desk has the most influence. I placed the Sony VGP-BPS8 PC tower in its cabinet because it isn’t accessible elsewhere without longer monitor cables. It needs ventilation, which is why the desk is away from the wall.

I could’ve tucked it closer but then it felt as if I would not have reclaimed some desk surface area.

So maybe you can see why I disqualified alternatives:

A.) A single desk-mounted dual-monitior stand would likely warp and maybe snap off the edge. I trust my handiwork over the integrity of particle board: before using a Dell XPS M140 Battery PC on it, the laminate already had a continuous, small fracture line on its corner, with just the torque exerted by the lamp pictured; I’m reluctant to have anything else on top.

B.) Wall-mounts would be disjoint when moving the desk for cleaning, so that would make accessing the cables on either end bothersome to regularly disconnect Dell Latitude D630 Battery, when pulling the desk out (with PC riding along).

I wanted monitors on an reasonably good-looking single “arm”, and I’m happy with the choice because it allowed an easy, further mod of acrylic shelves on top for knick-knacks.

The article Via lifehacker

Very powerful new nuclear batteries – digitalcamerabattery.us

Posted on December 12th, 2009 in battery specs, digital camera battery, laptop battery | Comments Off

Very powerful new nuclear batteries – digitalcamerabattery.us

Engineers from the United States Feilipufu Xie University of Rochester research team led by the newly developed nuclear batteries, which is unique in that the silicon wafers used for thermoelectric conversion. They renovated the surface a1175, carved into numerous wide and 1 micron, 40 micron deep concave point, such a three-dimensional response to the environment has greatly improved the electricity generated in one fell swoop would be the battery power increased by 10 times. Fu-Tse said: “People have already spent 50 years time to study the reaction of a simple nuclear decay into usable energy sources, but the final was always very low capacity. Now we have found a way to improve response effectiveness.” Safety high, broad application prospects.

As such nuclear Fujifilm NP-100 batteries would not cause radiation also do not have to worry because the metal seal nuclear battery would be sufficient to complete reaction of radioactive energy enclosed. And the tritium released from the ¦Â-ray penetration is not high, a piece of paper will be able to isolate it, let alone penetrate the skin of the.

End: battery blog , battery blog , battery blog , battery blog , battery blog , etc.

Very powerful new nuclear batteries can be used for 12 years

Posted on December 12th, 2009 in battery maintain, battery tip | Comments Off

Very powerful new nuclear batteries can be used for 12 years

Mention of nuclear energy, people with checks at each level are usually to a depth of fortification a1079 linked to nuclear power plants, it may not help but emerge out of radiation, the proliferation of such dangerous words. As everyone knows, nuclear power has been quietly changing our daily lives. U.S. scientists announced they have successfully developed a new type of nuclear batteries, and its power is 10 times the same battery and can be used continuously over a decade. According to the American super-secret power “Life Science” magazine May 13 reported that the principle of nuclear power generation and solar cell panels to the principle of sunlight into electricity is similar to nuclear pool of tritium (radioactive isotope of hydrogen) and other radioactive Fujifilm Battery gases will be released in the decay of the ¦Â-rays that have heat through the thermal battery components transformed into electrical energy.

However, due to gas decay process, the ray fired in all directions, and many have not been converted and disappeared without a trace, so after the battery is not there a nuclear power such as solar cells large.

End: battery blog , battery blog , battery blog , battery blog , battery blog , etc.

Internal Storage, Battery Life, Application Sales: 3 Crucial Ingredients Android Lacks

Posted on December 11th, 2009 in battery review | Comments Off

Like a coach for a football team, these key components need rallying and coordination for Android to grow and flourish…

Internal Storage on Android has Alzheimer’s
Bottom-line, handset makers need to really consider including a significant amount of internal storage Apple A1057 A1008. 256 megabytes just ain’t cutting it. SD Card storage is nice to have but Android phones should have a decent internal storage capacity as the first option then SD Card second. This would boost Android Gaming development if consumers could easily fit a 100MB game on the phone smoothly without clearing more than three quarters of their apps.

Battery Life is an Ankle-bitter
Partly faulted to Android’s OS and developers… background processing is a strength and fatality of the platform PowerBook G4 17 inch Battery. Sure we love the multi-tasking capabilities but hate the strain run-away processes do to performance and battery life. The Android OS by default should come with a power manager as do laptops offering; power saver, balanced and high performance battery profiles to choose from.

App Sales are Absent
Partly to blame are reasons above prohibiting superb app development and “Open Source”, which always has a confusing connotation with “free”. Even larger game development companies such as Gameloft has jumped ship on Android due to lagging sales Apple A1148 A1012. Android app developers are squeezed to make apps at extremely low costs plus they’re selling to a smaller customer based in comparison to Apple. Another key component is until recent, there’s no way to take advantage of impulse buying such as carrier billing or “in-app” purchases.

Improving these core aspects of the platform would attract iPhone developers whom given up on Android due to key points in this article to Latitude D830 Battery. Overall strengthen smartphones powered by Android.

The article Via AdnroidTapp

Replacing the battery in a scout for $10

Posted on December 9th, 2009 in battery review, battery specs | Comments Off

About 15 years ago I bought an optoelectronics scout frequency recorder. I thought it would help me find fun and interesting things to listen to on my radio, and it has not let me down. After 15 years however the nicads that came in it were showing their age and it would not operator for more than 15-20 minutes on a charge. I looked for a replacement Toshiba PA3356U-3BRS battery  and optoelectronics wanted $40 for one, and other vendors were not much better.

I decided there had to be a cheaper way to get the new PA3383U-1BRS. After a trip to Fry’s electronics, I got everything I needed for $10 including tax. Here is a brief explanation of what I did.

First thing I did was lay out the parts. I got 4 AA sized nimh batteries for $4, a battery holder, which required a 9v style connector. I thought this was a nice feature since I could replace the pack without resoldering if it was needed. I also liked the fact that I had 4 AA style toshiba PA3384U-1BRS, batteries that I could replace in the field if required. Granted it will take a screwdriver to do this, but its more possible than the shrink wrap battery that comes with it.

Remove the cover

Next you have to remove the 4 screws that hold the factplate on, as well as the screws that hold the back plate on. Once the floor plate and the cover are off, you can remove the two screws that hold the circuit board on. Then remove the circuit board from the Toshiba PA3395U-1BRS case.

Remove the battery

Now that you have exposed the battery, you can pry it out. It is attached by double sided foam tape. Once removed I rubbed off all the foam tape that was present on the back case. I then desoldered the PA3399U-1BRS battery pack from my scout and installed the 9v style adapter for the new battery pack. If you forget which lead goes where, there is a little +/- silk screened onto the board.

Install the new pack

I had to sand down the new battery pack a bit. I used a belt sander for the big part of it, and a dremel for the fine tuning. This was required to make it fit into the space provided. Just be certain there are no shorts and that the leads on the scout will not touch the Toshiba PA3176U-1BRS battery pack in any way that will cause it to short. The case is metal, it is conductive, and it is connected to ground. When you put the two screws through that attach the circuit board to the back case this can cause a short, you can fry the device or the batteries!

If you want you can put double sided tape under the Toshiba PA3191U-1BRS battery tray to prevent it from sliding around, you can also wrap it in a non-conductive material like the plastic bag the tray came in, to prevent it from shorting anything. PVC/electrical tape also works well to cover any exposed leads.

Reassemble the same way you took it apart, and make sure that it does not get warm, and that the scout functions run again with the Toshiba PA3191U-2BRS. If there is a short the scout may not even turn on, and it is likely that the batteries will get warm, which will transfer to the metal case.

At this point you should have a revitalized scout letting you have more mobility.

Dell XPS M1530 battery specs

Posted on December 3rd, 2009 in battery review, battery specs | Comments Off

Dell XPS M1530 battery specs

Always on the way for business or journey? Take it easy about running out of battery power! You can power your XPS M1530 with this 9-Cell Lithium-Ion Primary Battery. With a capacity of up to 85 WHr, the battery lets you work seamlessly when you are on the move for business trips or vacations. This battery provides uninterrupted reliable performance you need to get the most out of your system. This product has been tested and validated on Dell systems. It is supported by Dell Technical Support when used with a Dell system.

Dell XPS M1530 battery Highlights :

# 85 WHr capacity lets you work seamlessly while on the move.
# Offers reliable power for dependable performance
# Up to 600 charge-discharge cycles.
# 1 year warranty for XPS M1530 battery quality

Manufacturer Part# : GP975
Dell Part# : 312-0664

Dell XPS M1530 Tech Specs :

Features : For Dell XPS M1530 Notebook
Battery: 9-Cell Lithium-Ion Power Provided : 85 WHr
Product Type : Notebook Battery

Dell XPS M1530 battery customer ratings

Owerhouse of a battery. Charge lasted far longer than the 6 Cell I had prior. I still liked the look of my computer even though this battery was bigger (More bigger than Dell Inspiron 1520 Battery 9cells battery). The extra weight was not a problem (I am female and not very big.)

It Made my computer (XPS M1530 Laptop) so hot I had to return it and buy the 6 Cell. I could feel the heat off the touch pad and where I place my left hand when typing (where the hard drive is located.)

ConsThis battery is nothing special. Yes it is 9 cells but the poor quality of the battery counteracts the fact that it has 2 extra cells as 9cells latitude D620 battery and latitude D820.

I called tech help who did verify that the battery has more “mass” therefore would be hotter. I was surprised by this because what I had read here had me thinking it would be cooler than the 6 cell. It wasn’t. Too bad it was neat.

In all , this Dell XPS M1530 Battery is more powerful than 6 Cells XPS M1530 battery, also it become more hotter than 6 cells..

TrackBack : laptop batetry blog