Green batteries in our battery products cover only 20% of all
Posted on October 15th, 2009 in digital camera battery | Comments Off
Green batteries in our battery products cover only 20% of
Response to national energy-saving, environmental protection policy Digital Camcorder Battery appeals, a number of manufacturing industries in transition, produce high-quality environmentally friendly energy-saving products, but those products are currently facing market, torture, to promote the situation is not optimistic. Among them, the battery industry, the market faces an embarrassing is particularly prominent. In 1997, the former China Light Industry Association, the State Environmental Protection Administration and other 9 departments have jointly issued a “battery products on the limited provisions of mercury” and demanded from January 1, 2001, the ban of mercury in the domestic production of various types of Da battery weight of 0.025% of the battery.
Since January 1, 2005, the ban on domestic production of mercury batteries is greater than the weight of 0.0001% of the alkaline zinc-manganese batteries (not mercury content of less than 2% of the alkaline manganese and silver oxide button batteries). Is aimed at policy “baton,” the first source in the production of a high standard, thereby bringing about market consumption, thus speeding up the process of the popularization of environmentally friendly energy-saving battery. This provision has been enacted almost 10 years now, however, as the mainstream products in environment protection and energy battery – alkaline batteries in China’s cover only 20% of the battery products Digital Camera Battery, which not only in developed countries 80% ~ 90% of the high popularity of rate far away from the national “Tenth Five-Year Plan” 30% of the goals there is great distance.
Western developed countries has largely achieved the energy-saving environmental alkaline battery production to consumption, the transition, but in China’s markets, the majority of consumers apparently do not ignite consumer passion for alkaline batteries. Policies to guide the battery cell production, while energy-saving environmental protection, the relevant state departments and industry associations are also actively doing business Tuiyou limit inferior work, and strive for environmental protection to create a good energy-saving battery consumption environment.
Since August last year, started by the National Light Industry Quality Supervision and Test Center battery-specific testing, Nanfu, 555 and 11 backbone enterprises of mercury in alkaline manganese batteries are lower than the mercury content of mercury-free battery-limited targets, in full compliance with the provisions of the State Department 9 ; China Battery Industry Association, the 11 brands of alkaline manganese battery identified as the first “green alkaline manganese battery products,” recommended to the public. However, despite the relevant national departments and manufacturers to work together, environmental protection and popularization of energy-saving battery, or so slow the pace. Many in the industry say there is a big market spending is the crux.
In the vast majority of consumers in the eyes, the battery life is just the role of ordinary consumer goods, and soap, toothbrushes little different. Consumers will not spend too much buying batteries thoughts. In addition, the alkaline battery prices higher than the ordinary carbon-zinc Canon Battery some, many consumers feel that carbon-zinc batteries cheaper and affordable, especially in rural areas in the country a broader market, the level of consumption is still relatively low, so the consumption of the carbon-zinc batteries more directly that the consumption of alkaline batteries is a waste. Experts pointed out that this idea is a consumer misunderstanding.
From the consumer sense, energy-saving environmental protection despite the higher price of the battery, but it reflected energy-saving, environmental protection targets are ordinary carbon-zinc batteries several times. The south of Fu battery, for example, from the electricity index point of view, a Nanfu alkaline battery power is the same size carbon-zinc batteries of six times; from the environmental indicators point of view, Nanfu alkaline batteries almost without causing any pollution can be discarded along with the garbage; from life indicators point of view, the life of ordinary carbon-zinc batteries is 6 months, the battery can keep the original power capacity of 70%, alkaline battery shelf life is 3 years, 3 years, Nanfu Battery the electric capacity and 90%; from a social sense, the alkaline batteries used in the production of materials, more energy saving society. Because they do not use of natural manganese ore, manganese dioxide, its use can be used, or other low-grade manganese carbonate manganese ore for processing, so there is no shortage of resources.
The carbon-zinc batteries are the main component of natural manganese, manganese ore, but my discharge fewer resources, due to years of over-exploitation, the availability of discharge manganese nearly depleted. Experts say consumers can produce quite a big stir in the battery recycling issue. Whether in the district, school or government organizations and institutions, there will be a lot of recycling the battery box. Carbon-zinc batteries in the general popularity of the times, when people see that Canon BP-208 after the recovery of the battery box will naturally think of things that the battery is not environmental protection, it should be put boxes for centralized treatment. Such civil actions to achieve a good recovery performance. In the environment protection and energy the battery will become the mainstream of the times, if we can learn from this way of thinking, to guide people in popular awareness and consumption of alkaline batteries, they will certainly speed up the process of the popularization of environmentally friendly energy-saving battery.
Experts Xiangjie new phone charger standard mobile phone industry in the four affected
“Mobile Communications Handset Charger and Interface Technology Requirements and test methods” standard Publicizing will be held in Beijing recently. Publicizing by the Ministry of Science and Technology Division and the Telecommunications Authority and co-host China Communications Standards Association. Ministry of Science and Technology Department, Telecommunications Authority and the China Communications Standards Association related to leadership, as well as from more than 70 mobile phone, charger design and production of corporate senior management and technical personnel to participate in the meeting.
Department in charge of pushing new standards for mobile phone charger according to the new standard, all future mobile phones can use a common charger device, cell phone charger interface, may also be uniform for the USB interface, can be used to recharge, but also connect the computer to facilitate information transmission. In addition, the new standard charger and power-saving standards for the safety also made strict limitations, further emphasized the environmental features of the new standards. Ministry of Information Industry will be present from earlier revealed that the type size range of mobile phone charger to a unified message, the industry is the imminent introduction of the policy has been talk that Canon BP-511 some manufacturers are keeping chances, has yet to come up with countermeasures.
Industry analysis, the standard is formally tabled, the user only need a cell phone charger can charge more than meet the demand, while mobile phone sales likely to become the host of this new way of selling only, while the accessories comes with the sale will likely choose the or separately purchased way. At present the different cell phone manufacturers, and even a mobile phone handset manufacturers have adopted different models of different chargers, users had to replace the phone for a new cell phone charger to pay the costs of suit, which cost the cost of a user is unclear.
However, the competent departments of the implementation of this policy a firm attitude. At the meeting, department heads clearly put forward the timetable for the implementation of new standards, no later than the end of this year to be a unified standard for all vendors are likely to begin this year. Authoritative experts Xiangjie new standard for the content of the specific content of the new standard for that? How much will this new standard would give a more rapid development of mobile phone industry What are the effects?
Recently, the main drafter of the draft of the standard, one of the main Telecommunications Research Institute CTTL any Gui Li detailed explanations of the specific content of the standard four, and said that after the implementation of the standard, consumers do not have to buy again when you change mobile phone recharge device, the same charger can charge different models of mobile phones; the same time, consumers will be able to use computers to charge their cell phones without having to bring a computer at the Canon LP-E5 same time to bring mobile phone charger. This is China’s mobile phone industry and the consumers will have a significant impact.
HE Gui Li said the subject of concern to all sectors of society and consumers, mobile phone charger and interface standard was formally approved by Ministry of Information Industry has approved release of the standard officially known as the “Mobile Communications Handset Charger and Interface Technology Requirements and test methods”, Standard number is: YD/T1591-2006. HE Gui Li said the specific content of the standard four, and the role of these specific elements of the mobile phone companies and consumers will have an important effect is that the mobile phone business R & D and launch of mobile phones in the next step must be to comply with rules.
First, the standard charger and cell phones will adopt a broad generic USBA series (USB) interface, enabling first-line multi-purpose, not only can be used for charging, but also for data transmission via computer USB port to achieve an interim charge, is very convenient ; second is a unified USB port on the charger side of the cable connected to the mobile phone, mobile phone and connect the interface cable designed by the enterprises, so that a standardized manner conducive to cell phone data interface appearance and personality development, not only to solve the charging GM technology, environmental protection and conservation of resources, without affecting the phone’s design and development; 3 is a standard charger is also energy-saving, reliability and put forward demands, so that consumers can use the process of energy-saving, saving, reliability and Gao, enhancing the technical performance of the charger; 4 is a standard Canon NB-1LH charge mode on the charger as well as the safety of mobile phones were strict rules to ensure that the use of safety; standards also properly taken into account according to the new standard production mobile phone and its connecting lines and computer connections and mobile phones have been sold with the compatibility and security issues.
The new standards will lead to integration of mobile phone accessories industry
According to Ho Gui Li, at present China’s domestic mobile phone subscribers has exceeded 400 million, the replacement phone has become a wide range of social behavior, greatly shortening the replacement cycle of each year to replace a mobile phone users reached 100 million or so. The replacement of mobile phone handset and charger and because the interface only applies to the original model or the original brand, thus appeared the hands of users to retain a large number of idle charger phenomenon, resulting in a waste of social resources and living environment pollution. Specifically, if we did not standardized, each producing a need to produce a mobile phone charger, cell phone and charger with sales of replacement handsets to accelerate as a large number of consumption of public resources. Charger interface unification, cell phone chargers production and production do not have to synchronize the user to Inspiron 1300 Battery replace mobile phone chargers when not need to change, while the charger to normal service life of at least three years, which means that the total production of China’s battery charger be substantially reduced and significant savings for the state and society material resources.
In addition, the waste involved in the handling of the charger will not only cost, but also may increase the risk of environmental pollution. An integral part of the charger, contains a lot of metal and chemical substances, if not properly treated, over a long period after the oxidation and decomposition will produce large amounts of harmful substances to our living environment pollution. Mobile phone charger reduction in total output may be a significant reduction in cell phone charger on the environmental risks. And this large number of mobile phone accessories manufacturers will also have a strong impact.
To industry sources, the current cost of a charger 5 yuan, but the sales prices are easily dozens of dollars or even a hundred dollars, if the uniform standards, users no longer need to be purchased to replace mobile phone mobile phone charger, which will undoubtedly reduce these firms income. Therefore, this policy laptop batteries may lead to the integration of mobile phone accessories industry restructuring.